Skip to content

Atlas Automotive Equipment FM9SL In Ground Full-Rise Scissor Lift 9000 lb. Capacity

Sold out
Original Price $8,399.00
Current Price $7,599.00
Shipping

Notify me when back in stock

The Atlas FM9SL 9,000 lb. flush mounted scissor lift is the perfect choice for those service facilities that need to maximize the number of vehicle lifts per service area square foot. If you like the “clean floor look” for your service department (no above ground lifts), then the Atlas FM9SL flush mounted scissor lift offers the perfect alternative. Unlike “old school in-ground” lifts, the flush mounted lift requires minimal excavation and the electric/hydraulic power unit is easily accessed during periodic maintenance. The flush mounted platforms offer no “above ground” obstruction and the platforms can be “driven over” from any direction so that a vehicle may be properly positioned in the tightest of spaces. The Atlas FM9SL has both front and rear platform extensions that can be used when lifting a long wheel base pick-up truck. As with any scissor lift that is completely open (no cross support bar in the front or rear to keep the platforms level), the operator must make sure that the vehicle's frame is positioned at least 6 inches from the inside of the platform. If too much weight is positioned near the edges of the platform (closer than 6 inches from the inside edges), the platforms may become “pigeon toed” and damage may occur. We sell the Atlas scissor lift support bar kit to disperse the narrow frame weight over the entire platform lifting surface

 

Features and Benefits:

  • 9,000 lb. Capacity
  • Commercial Grade
  • Full Rise Lift
  • Adjustable Width
  • Platforms Extend, Both Ends
  • No above ground obstruction
  • CE Certified
  • Air-Operated Single Point Lock Release (External Air Supply Required)
  • Open Center Design
  • Separate Self-Contained Control Unit
  • Grease Zerk Fittings at each Hinge Point
  • Heavy Duty Rubber Lifting Blocks Included
  • Mounting Hardware Included
  • 220volt/1phase Electric Operation (Requires a 30amp Breaker)
  • Shipping Weight: 2,025 lb.
  • 1 yr Structural ‐ 1 yr Hydraulic Warranty ‐ Parts Only

Atlas FM9SL Specifications

  • Lifting Capacity: 9,000 lbs.
  • Max Lifting Height Above Floor w/ Standard Lifting Blocks: 73 3/4" (6' 1 3/4")
  • Max Lifting Height Above Floor w/o Standard Lifting Blocks: 71" (5' 11")
  • Overall Length w/ Extensions out: 80" (6' 8")
  • Overall Length w/ Extensions in: 64" (5' 4")
  • Platform Width: 21 "
  • Platform Thickness: 4"
  • Minimum Lowered Height (In Ground): 13"
  • Width Between Platforms: Adjustable up to 31"
  • Air Requirement: 90-120 PS(
  • Power Unit: 220 volt +/- 5% (209-231volts) single (1) phase. A 30 amp breaker is required
  • Oil Requirement: 3-5 Gallons AW32 or AW46 (NOT INCLUDED)
  • Shipping Weight: 2,025 lbs.

Atlas FM9SL Manual

*Based on Nationwide Averages - Contact Us to see if we can ship for less. 

Warehouse Pickup locations (No shipping charge):

  • Atlanta, GA
  • Dallas, TX
  • Fresno, CA
  • Indianapolis, IN
  • Phoenix, AZ
  • Somerset, NJ
Description

The Atlas FM9SL 9,000 lb. flush mounted scissor lift is the perfect choice for those service facilities that need to maximize the number of vehicle lifts per service area square foot. If you like the “clean floor look” for your service department (no above ground lifts), then the Atlas FM9SL flush mounted scissor lift offers the perfect alternative. Unlike “old school in-ground” lifts, the flush mounted lift requires minimal excavation and the electric/hydraulic power unit is easily accessed during periodic maintenance. The flush mounted platforms offer no “above ground” obstruction and the platforms can be “driven over” from any direction so that a vehicle may be properly positioned in the tightest of spaces. The Atlas FM9SL has both front and rear platform extensions that can be used when lifting a long wheel base pick-up truck. As with any scissor lift that is completely open (no cross support bar in the front or rear to keep the platforms level), the operator must make sure that the vehicle's frame is positioned at least 6 inches from the inside of the platform. If too much weight is positioned near the edges of the platform (closer than 6 inches from the inside edges), the platforms may become “pigeon toed” and damage may occur. We sell the Atlas scissor lift support bar kit to disperse the narrow frame weight over the entire platform lifting surface

 

Features and Benefits:

  • 9,000 lb. Capacity
  • Commercial Grade
  • Full Rise Lift
  • Adjustable Width
  • Platforms Extend, Both Ends
  • No above ground obstruction
  • CE Certified
  • Air-Operated Single Point Lock Release (External Air Supply Required)
  • Open Center Design
  • Separate Self-Contained Control Unit
  • Grease Zerk Fittings at each Hinge Point
  • Heavy Duty Rubber Lifting Blocks Included
  • Mounting Hardware Included
  • 220volt/1phase Electric Operation (Requires a 30amp Breaker)
  • Shipping Weight: 2,025 lb.
  • 1 yr Structural ‐ 1 yr Hydraulic Warranty ‐ Parts Only

Atlas FM9SL Specifications

  • Lifting Capacity: 9,000 lbs.
  • Max Lifting Height Above Floor w/ Standard Lifting Blocks: 73 3/4" (6' 1 3/4")
  • Max Lifting Height Above Floor w/o Standard Lifting Blocks: 71" (5' 11")
  • Overall Length w/ Extensions out: 80" (6' 8")
  • Overall Length w/ Extensions in: 64" (5' 4")
  • Platform Width: 21 "
  • Platform Thickness: 4"
  • Minimum Lowered Height (In Ground): 13"
  • Width Between Platforms: Adjustable up to 31"
  • Air Requirement: 90-120 PS(
  • Power Unit: 220 volt +/- 5% (209-231volts) single (1) phase. A 30 amp breaker is required
  • Oil Requirement: 3-5 Gallons AW32 or AW46 (NOT INCLUDED)
  • Shipping Weight: 2,025 lbs.

Atlas FM9SL Manual

*Based on Nationwide Averages - Contact Us to see if we can ship for less. 

Warehouse Pickup locations (No shipping charge):

  • Atlanta, GA
  • Dallas, TX
  • Fresno, CA
  • Indianapolis, IN
  • Phoenix, AZ
  • Somerset, NJ
Shipping

Forklift & Lift Gate Information

Unloading Requirements

Our larger equipment — including single-post, 2-post, and 4-post lifts — must be unloaded using a forklift or equivalent equipment.
Smaller items such as tire changers, wheel balancers, and similar tools can be delivered with lift-gate service at no extra cost, which safely lowers the shipment to ground level.

⚠️ Hand unloading is not permitted due to carrier safety policies. Drivers are not allowed to wait during manual unloading.


If You Don’t Have a Forklift

No problem — we can help you arrange a smooth delivery.

  • Freight-terminal pickup: We can ship to a local freight terminal (usually within 30–60 minutes of your address).

  • Alternate delivery location: We can deliver to a friend, workplace, or business with a forklift.

  • Warehouse pickup: Pick up directly from one of our partner warehouses (available on many products).

  • Forklift rental: As a last option, you may rent a forklift locally — deliveries are scheduled in advance so rentals are short-term.


Residential Deliveries

We deliver to residential addresses across the U.S.
The freight carrier will contact you before delivery to schedule a convenient drop-off time.


Warehouse Pickup (No Freight Fees)

Many of our brands allow direct pickup from U.S. warehouses.
During checkout, select “Pickup” and choose your preferred location.
After placing your order, we’ll email your pickup number and instructions.


Freight Terminals

If you don’t have a forklift, we can ship to a nearby freight terminal for pickup (typically a 30–60 minute drive).

Some oversized items ship on dedicated flatbed trucks — in those cases, terminal pickup is not available. This will be clearly noted on the product page.


Flat-Rate & Freight Quotes

Most products include a flat-rate freight fee based on nationwide averages, shown at checkout.
For bulk or custom freight quotes, contact us at support@elitegaragetools.com before ordering and we’ll confirm the lowest available rate.


Shipping Timeline

All products typically ship within 3–5 business days after payment from U.S. warehouses.
Tracking information will be provided once your order leaves the warehouse.


Questions?

If you have any questions or need assistance arranging delivery,
📧 Email: support@elitegaragetools.com
📞 Phone: (833)724-8902

Why Buy From Us

Why Buy From Elite Garage Tools

We know you have plenty of options when it comes to buying shop equipment online — here’s why customers choose Elite Garage Tools.


🧰 Trusted U.S. Retailer

We work directly with verified U.S. distributors and manufacturers to ensure every product we sell is authentic, covered by a warranty, and ships safely from within the United States.


💵 Competitive Pricing

We keep our pricing honest and transparent. If you find a lower total price from another authorized U.S. retailer, our Price Match Guarantee means we’ll match or beat it — every time.


🔁 30-Day Easy Returns

Not completely satisfied? No problem. Our Easy Returns Policy gives you 30 days to return qualifying products for a refund or exchange. We make the process quick and straightforward.


🚚 Reliable U.S. Shipping

All orders ship from U.S. warehouses through trusted freight carriers like FedEx, UPS, and regional LTL services. Delivery times and costs are clearly shown at checkout — no hidden fees, ever.


💬 Real Customer Support

Our support team is based in the U.S. and available by phone, Chat box or email during business hours. Whether it’s helping you choose the right lift or track your order, we’re here to help.


🔒 Safe & Secure Checkout

Your privacy and payment security are important to us. We use SSL encryption and verified payment gateways such as Visa, MasterCard, Discover, Shop Pay, and PayPal.


Our Commitment

Every brand we carry is selected for proven reliability and long-term value.
We’re dedicated to earning your trust through transparent policies, responsive service, and quality equipment that performs as promised.