Atlas Platinum PVL10 10,000 lb ALI-Certified 2-Post Lift
The Atlas Platinum PVL10 10,000 lb 2-Post Lift is a commercial-grade automotive lift designed for professional repair shops, dealerships, and serious home garages. With ALI certification, heavy-duty Double-S column construction, and the ability to install the lift in either a symmetric or asymmetric configuration, the PVL10 delivers the strength and flexibility needed to service a wide variety of cars, trucks, and SUVs.
Flexible Symmetric or Asymmetric Installation
One of the standout features of the Atlas PVL10 is its flexible installation design. The lift can be configured symmetrically or asymmetrically, allowing you to choose the setup that works best for your shop and the vehicles you service.
The asymmetric configuration provides convenient vehicle positioning and easier door access, while the symmetric configuration provides additional clearance between the columns and up to 99.5 inches of drive-through clearance, making it a great option for wider trucks and SUVs.
Three-Stage Arms for Greater Vehicle Coverage
The PVL10 features three-stage telescoping front arms that provide additional reach for different wheelbases and vehicle lifting points. This added versatility makes it easier to properly position a variety of passenger cars, pickups, SUVs, and other vehicles.
The lift also includes double screw-up adapters and an 8-piece truck adapter set, providing additional height and flexibility when working with vehicles that have higher lifting points.
Heavy-Duty Double-S Column Construction
The Atlas Platinum PVL10 utilizes a Double-S column design engineered to provide increased column strength and rigidity. Heavy-duty 6mm steel column construction adds durability for demanding automotive service environments.
Protective carriage pads and rubber column guards also help reduce accidental vehicle contact and protect both the vehicle and lift during everyday use.
ALLY Hydraulic Power Unit
The PVL10 is equipped with an ALLY Hydraulic AL2850 power unit certified by MET Laboratories for applicable electrical requirements in the United States and Canada. The power unit is designed to provide dependable operation for demanding automotive lifting applications.
Built for Professional Automotive Service
With a 10,000 lb lifting capacity, ALI certification, single-point lock release, overhead open-floor design, secondary locking system, and up to 81.5 inches of maximum lifting height with adapters, the Atlas Platinum PVL10 provides the capability and flexibility needed for professional automotive service.
Whether you're outfitting a commercial repair facility or upgrading a serious home garage, the Atlas Platinum PVL10 10,000 lb 2-Post Lift offers a versatile lifting solution built for a wide range of vehicle service applications.
Atlas PVL10 Specifications
-
Lifting Capacity: 10,000 lbs.
-
Overall Height – Standard: 135 7/8" (11' 3 7/8")
-
Overall Height – Extended: 139 7/8" (11' 7 7/8")
-
Overall Floor Width – Asymmetric: 139"
-
Overall Floor Width – Symmetric: 137 1/2"
-
Outside Column Width – Asymmetric: 130"
-
Outside Column Width – Symmetric: 129 1/4"
-
Maximum Lift Height Without Adapters: 72 1/2"
-
Maximum Lift Height With Adapters: 81 1/2"
-
Minimum Arm Height: 4"
-
Inside Column Width – Asymmetric: 107 3/4"
-
Inside Column Width – Symmetric: 112 1/2"
-
Drive-Through Clearance – Asymmetric: 91"
-
Drive-Through Clearance – Symmetric: 99 1/2"
-
Column Size: 7" x 10 1/4"
-
Column Steel Thickness: 6mm
-
Base Size: 15" x 18"
-
Electrical Requirement: 220V, single phase
-
Recommended Breaker: 30 amp
-
Hydraulic Oil: 3–5 gallons AW32/AW46 (not included)
-
Adapter Heights: Four each – 3" and 6"
-
Arm Hole / Adapter Peg Size: 2"
-
Concrete Requirement: Minimum 4" thick, 3,000 PSI concrete
-
Shipping Dimensions: 115" L x 22.5" H x 38" W
-
Shipping Weight: 1,850 lbs.
Key Features
-
ALI Certified
-
10,000 lb Lifting Capacity
-
Double-S Column Design
-
Overhead Open-Floor Configuration
-
Symmetric or Asymmetric Installation
-
Three-Stage Telescoping Front Arms
-
Single-Point Lock Release
-
Secondary Locking System
-
Protective Carriage Pads
-
Rubber Column Guards
-
Powder-Coat Finish
-
Double Screw-Up Adapters
-
8-Piece Truck Adapter Set Included
-
Mounting Hardware Included
Warranty
-
5-Year Structural Warranty
-
2-Year Hydraulic Warranty
-
2-Year Power Unit Warranty
-
Parts only; warranty terms and conditions apply.
