Atlas® Garage PRO8000EXT-L:
Extended Length and Height ConfigurationDimensional Advantages Over Standard Models The Atlas® Garage PRO8000EXT-L provides the extra lifting height of the PRO8000EXT while adding 20 inches of additional length and 3 inches of extra width. Compared to the original standard Atlas® Garage PRO8000, this model is 20 inches longer, 3 inches wider, and 14 inches taller.
Extended Wheelbase Compatibility and Limitations The extra runway length accommodates nearly all longer-wheelbase pickup trucks, except duallys. Dually trucks cannot be serviced because the dual rear wheels are TOO WIDE to fit between the column lock assemblies. For dually truck requirements, consider the Atlas® Garage PRO9000 portable lift designed for dual-rear-wheel applications.
Intended Use: Residential and Restoration Applications The Atlas® Garage PRO series 4-post lifts (featuring 8,000-pound capacity) are designed and built for use by homeowners or restoration shops. These lifts are NOT designed for use in commercial repair shops where they would be raised and lowered several times per day. For questions about application suitability, contact a salesperson for guidance.
Included Accessories and Portability The PRO8000EXT-L includes free plastic drip trays, a free steel jack tray, and a free caster kit with polyurethane wheels. The caster kit installs or removes in just minutes, making the lift portable and enabling movement between bays or to exterior locations.
Popular Companion Purchase Many customers who purchased this lift also acquired the Atlas® RJ35
Specifications:
- Capacity: 8,000 Lb.
- Lifting Height To Top Of Runway: 84" (7')
- Clearance Under Runways: 78 1/2" (6' 6 1/2")
- Height Of Columns: 98 1/2" (8' 2 1/2")
- Overall Width (Without Motor): 108" (9')
- Overall Width (With Motor): 116 1/2" (9' 8 1/2")
- Overall Length With Approach Ramp: 222" (18' 6")
- Approach Ramp: 37" (3' 1")
- Runway Width: 22" (w/ Rails) or 18 3/4" (Driving Surface)
- Runway Length: 185" (15' 5")
- Runway Thickness: 4 1/2"
- Width Between Runways: 38" (3' 2")
- Width Between Runway Rails: 34" (2' 10")
- Outside Runway To Outside Runway: 77 3/4" (6' 5 3/4")
- Clearance Between Columns: 98" (8' 2")
- Length Between Columns: 176 1/2" (14' 8 1/2")
- Maximum Wheel Base: 173" (14' 5")
- Drive Thru (Outside Of Tire To Outside Of Tire): 84" (7')
- Motor/Electrical Requirement: 110 Volt, 30 AMP BREAKER REQUIRED
- Shipping Weight: 1,900 lb.
Features and Benefits:
- 8,000 lb. Capacity
- Free Standing/Portable Design
- Extra Tall/Extra Long
- Diamond Plated Runways
- Single-Point Lock Release
- Lock Ladder Design
- Double Lock Safety System
- Caster Kit With Polyurethane Wheels Included
- Steel Approach Ramps Included
- Steel Jack Tray Included
- 4 Plastic Drip Trays Included
- 4 Wheel Stops Included
- 2 Rubber Wheel Chocks Included
- Perfect For Storing Or Working On Vehicles
- 110volt Electric Operation (30 AMP BREAKER REQUIRED)
- Shipping Weight 1,900 lbs.
- 2 yr Structural ‐ 1 yr Hydraulic Warranty ‐ Parts Only
Atlas PRO8000EXT-L Product Manual
*- Contact Us For Pick Up
Warehouse Pickup locations (No shipping charge):
- Fresno, CA - 3395 E. North Ave., Suite 101, Fresno, CA 93725
- Phoenix, AZ - 2115 S 11th Ave., Suite 100, Phoenix, AZ 85007
- Buford, GA - 1750 Satellite Blvd NE, Suite 300, Buford, GA 30518
- Greenfield, IN - 6278 W 300 N, Greenfield, IN 46140
- Somerset, NJ - 70 Schoolhouse Road, Somerset, NJ 08873
- Arlington, TX - 714 107th St., Arlington, TX 76011
Can't find what you're looking for? Our team is here to help.